alexey
-
Content
237 -
Joined
-
Last visited
-
Feedback
0%
Everything posted by alexey
-
The same answer I recieved today from local manufacturer :) And, now grit sand paper + many soft blows = nice looking work Thanks a lot to all.... Lexa
-
and Two expert - two ways... I use new Stimpson spur grommer inserting die (S7685 from Para-Gear), and tomorrow will try body shop hammer Lexa
-
I allways damage SS grommet in the final stage of installation :( I know about oiling, about do not force too much, but ... yet no lack... Can somebody tell me few tricks? Lexa
-
Is there any dealer of RAWA in USA? I was trying to connect with them directly, but without success. May be, thry dealer it will be easer? Thanks a lot Lexa
-
Wings W8 - for what size of canopies? Thanks... Lexa
-
They dont sell raw materials - only finished products... Still looking... The link to manufacturers site: http://www.faytex.com/Products/Dri-Lex/Aerospacer/622.html but they sell in really big quantities :( Lexa
-
Same result :( Summer vacation? Lexa
-
Yep, but they didnt read their e-mails... :( So - may be somebody know some personal e-mail... (use phone - bad idea, we have near 12 hours difference in time) Lexa
-
Need some rigging materials, and trying to connect with them more then week via e-mails.... Without success... Does anybody have their working e-mail, or - does they working in the summer? Sorry for bad English... Lexa
-
You are speeking about foam in flaps and leg-straps pads, and I asking about spacer foam mesh backpad. I cant find it in ParaGear :( Lexa
-
Spacer foam - material on back of new containers - like Odyssey. What is that and where to buy? Sorry for bad english.... Lexa
-
Cup on reserve PC.. It has to be strong and stiff enouf to not deformate on the sun, so - is it some special plastic? Sorry for bad English Lexa
-
Is there some standart for that, or any manufacturer uses that they used? I checked 5 rigs in my loft - space varry for 4,6 mm to 6,5 mm. Sorry for bad English Lexa
-
I know that... Just for my education, i'd like to ask - how do the scaling their containers - in what dimension - in width and length, width and height, in width, length and height - but how they keep proportion to have recomended loop for all reserves? Lexa
-
If they make closing loop on reserve the same - how do they scaling container? Only by changing length and width (to hold triangle proportion the same)? Or, I miss something on my geometry lessons in school? Lexa
-
Thanks all. Esp. thanks to Martin and Hector from Icarus Europe... They send me line chart same day, and call to me in Ukraine - to clear the rest of my questions... They told, that do not put linechart on site because of fear misrigging... Thanks... Sorry for bad English.. Lexa
-
Some mnf (like PD) has such instructions on their line trim chart, so no... Is there any "standart" method how to measure that slack, or how big it has to be - copying measur. from old lineset is not the best way, i think... Sorry for bad English... Lexa
-
We made a lot of jumps from brige 50 m (160 ft) by PCA, over the ground, that gives us about 2-3 sec of canopy fly. Now we a planing to make some show with jump from bange-jump tower in the center of the city. Alt - 40 m (130 ft), over the water. I can make PCA from there, but dont want to land in water - if I'll have 2 sec of canopy fly - I can land on ground (to not wet my lovely Ace 260, without vents or ZP top skin...) Lexa
-
Packing instruction a little bit difficult for me - I dont understant it without pictures.... For all - how do youy pack them in.. I/m planing to make DB the same size as me pack tray in my Atmosphere, and thinking about how to stoof canopy in there... Just like skydiving (with the same folds)? Lexa
-
If somebody can help - I need max. different ideas about directbag and variants of packing. May be - fotos or drafts... What is the lowest safe alt to go with DB? Sorry for bad English.. Lexa
-
PIA TS135 (submitted for new TSO standard) on line
alexey replied to councilman24's topic in Gear and Rigging
I read that document, and found some not clear for me places: 1. Is it OK, that manufacturer can be certified for any weight, or I miss something? 2. There are no procedure for calculation or measuring peak opening force 3. What does it mean - non-positive locking device? There are no such term in previous document 4. What does that mean in - Test condiotion four in 4.3.5.3? 5. In 4.3.7 - if manufcturer trying to recieve certificate for some rig with such MOS and MPOS - 240 and 200. if we calculate: MAOT=5,3 s and MAL=533 ft. Is't it a little too big? Sorry for bad English :( Lexa -
Have someone the last updated drawn for 3-ring risers (with reinforcement). If it will have exact measurements - it will be perfect... Sorry for bad English... Lexa
-
Thanks for your info... The last question - if you need (somewhy...) to make it with E thread - you have to make 66 inches of stitching (actually less, if you use type 8 webbing) Can you make 5 or 6 or 7 (whatever its need to be) points cross stitch - its simplier to sewn thick materials with straight stitch? P.S. Pure theoretic, just for info - how far can you gj from Pointer :) Sorry for bad English Lexa
-
I dont want to do it - I just asking - why not? (If you CAN do the same streght some how) Lexa
-
Can you make more points in stitch parrern - i.e. - 5-6 points cross stitch? Or, you can use zigzag? Sorry for bad English... Lexa