alexey

Members
 View Profile  See their activity

  • Content

    237

  • Joined

  • Last visited

  • Feedback

    0%

Everything posted by alexey

  1. alexey
    A,B,C,D yokes on Jav - how long actually are? What the difference between them? Sorry for bad English Lexa
  2. alexey
    Can you please give a link to that bulletin? Lexa
  3. alexey
    Actually - I'm the one :) And it will not one time job :) Where can I fint it? Lexa
  4. alexey
    It makes ID much smaller - not really good :( ... Lexa
  5. alexey
    Does anyone try to "cover" somehow cutted edges on cutaway\ripcord housings (in you need some custom lenth) If you use ferrules - how do you install them? May be some other method?? Thanks Lexa
  6. alexey
    +1. I cant too Lexa
  7. alexey
    Is it still in use? Is it only for Sigma, or for Micron too? How are field feedback about them? Sorry for bad English Lexa
  8. alexey
    Construction of Vector\Sigma harness ring-top connection point (and Next Tandem). They use 2-pieces construction with 2 rings - for main canopy and for top connection of the passenger. Others company tend to use 1-piece construction - on top hole connect canopy, on bottom - passenger. The question is: - construction (scetch draw). - what is the idea behind 2-pieces construction. - any minuses of such construction. Thanks a lot. Sorry for bad English Lexa
  9. alexey
    No, i didnt seen your plier. From what i see - the grommet was installed by some kind of press (brand-name h\c) and was set very good. Lexa
  10. alexey
    O size Lexa
  11. alexey
    How to remove SS grommets... Fast and safe for the hands Lexa
  12. alexey
    I'm looking for supplyer of non-compressing cutaway\ripcord housings. Can anyone help me? Lexa
  13. alexey
    Actually, Aeros do not manufacture Blade - they outsource it, and sell SWS rigs (GLS Blade in that case) under their name with their Ballistic canopy. Lexa
  14. alexey
    Final prototype of my h\c construction. Container for Tempo 120\Katana 120. 4 rings harness. Wearer - 183 cm, 75 kg (in you need scale). Lexa
  15. alexey
    As I understend - for twin clamp you uses side jaws (one with space between jaws) - to dont damage clamp and for I ear you uses top jaws (that closes complitely) - to fix housing - right? Lexa
  16. alexey
    Yep. One that Para-Gear sells there: http://www.paragear.com/templates/parachutes.asp?group=164&level=2&parent=27 Lexa
  17. alexey
    Noone uses that clamps??? Lexa
  18. alexey
    So, description: I did buy 1ear and 2 ear oeticker clamp, and side jaws. The problem with 1-ear clamp for reserve: I put the clamp on type 4 9\16" tape. When I'm trying to press it, I've can squize it so much that I actually damafe the tape, but even after that ripcord housing can be moved out from clamp. I have to set heat-tybe over housing to fix housing from moving out of clamp. The problem with 2-ear clamp for cutaway: it made from alum, so, when I press jaws to set it, I can easelly broke clamp in between housings. How much force should be applyed on jaws? Which jaws should I use (there are 2 on device - one that closes totally, and one thet has some space between jaws?) How to fix reserve housing from moving? Thanks... Sorry for bad English Lexa
  19. alexey
    For example - riser testing at 600 lbs for releasing (as per 3 ring construction manual) - ripcord testing has something near load.. ets... Lexa
  20. alexey
    I'd like to costruct some kind of test device for ripcords. How to fix top side (pin and cable), to not damage them? Metal to metal contact is not a good idea, right? Lexa
  21. alexey
    Its much easier\cheaper to make it, actually Here is what I do for my friends: http://glc.crimea.ua/glforum/viewtopic.php?t=48 Lexa
  22. alexey
    Sorry.. On foto you can look there: http://www.skycentre.net/index.php?showtopic=2963&st=0&#entry29885 Lexa
  23. alexey
    I like local DZ - you alway can educate yourself there. Look what I found last weekend. Have fun Cypres location changed too - to the packtray (as Jav\wings) Lexa
  24. alexey
    My customer lost his PC cup in tumbling reserve deployment. I've used loops, but it some cases - they wont help... Lexa
  25. alexey
    I just find a tool for presize dimension. inside diameter 1-ear clamp after installation - 10 mm. outside diameter of ripcord housing with AL ferrule (like RI uses) - 9,8 mm (clamp can be moved by housing ferrule) outside diameter of ripcord housing with brass ferrule (like Para-Gear sells) - 9,3 mm (clamp do not hold housing at all) Lexa