Matthurin

Thanks for the feedback! Well that's what I intended to do anyway. I was just wondering this as it's only a few millimeters big, and as I have little knowledge in terms of canopies and that I prefer to be 100% sure about the equipment I jump I also came here to seek advice, and I thank you guys for it! Cheers, Matthurin

Hi there, I bought an Electra 150 a few months with about 400 jumps, loading it at 1.32. I did about 20 jumps on it, and realised yesterday while packing that some stiches were off at the left end cell. It's located right at the link between the leading edge and the cell side, and about 0.5/6 inch is unstitched. My first concern here is to know if it could get worse and if I should go straight to see my rigger to fix this, as I guess the pressures exerted at this point can be quite high during the opening, and I wouldn't like to see my canopy tearing off right above my head... The other thing I wonder is if it could be due to my pack job, as I tend to put the 4 left and right cells into the middle one. Any opinion is welcome! Cheers, Matthieu