dacota46
-
Content
11 -
Joined
-
Last visited
-
Feedback
0%
Everything posted by dacota46
-
My car got broken into and my rig and full rigging kit were stolen. Wings W5 SN 3255 Gold and Navy Blue Birdman and PD logos Main was a Stiletto 135 from 1994 Reserve Speed 2000 from 1998 AAD Cypres change
-
Thanks for the reply. I just got through to Kelly on her private email and she sent me the following measurements: The finished length of the safety stow should be 5.5”. We cut the bungee at 12.5” long, and overlap the ends 1.5 Thanks for the lengths of the other manufacturers.
-
I am outraged. You are a very cocky lady!!! Too bad you have not read the whole post. I can't call them because I can't reach them. The dirty method belongs to dirty riggers not to me. If there are posts on the forum which you do not like please feel free NOT to reply.
-
Hello I am looking for the size of the safety stow of an Infinity I-11SN. After viewing some of the posts and replies: I have emailed the manufacturer with the serial number of the rig and there is no response. I tried calling and the number on their web site can not be reached from my calling area. I am a Master Rigger I'd appreciate any help.
-
I just found an Icarus 365 line trim chart. It says: On the B line 1 cm. On the C line 2.5 cm. On the D line 3.5 cm.
-
Sigma Tandem is 1 inch on the B and 1.5 inches on the C. The Icarus is a bit bulkier.
-
Thanks for the answer. Just wanted to make sure. Now that you brought that up isn't the trim on the Icarus a bit different then on the Precision? You mentioned you used Icarus lines on a Precision canopy.
-
Hello Can anyone help me with the Precision 365 Tandem line trim chart? Their web site is down. I need to know the slack measurement on the stabilizers when relining the canopy. Thanks