Dan_Lotz 0 #1 April 4, 2007 I did a quick search and could not find any information I was looking for, I have a small burn on the belly side on my V2 legwing. Its about as small as a pea and I have put duct tape over it to get it through the weekend My question is if anyone could recommend a two part epoxy or glue to secure a black zp patch. I figure i do not want to unstich the legwing to sew a patch on, any recommendations are appreciated . Thanks Dan"He wants to make sure God wants him to live. So he spends a lot of time asking. He brings himself close to the edge.. If God wants to take him, all he needs to do is blow." Dave Eggers Quote Share this post Link to post Share on other sites
tr027 0 #2 April 5, 2007 I had a similar tiny hole in the topskin of an arm wing. Best solution I found was silicon seam sealer from the fabric store."The evil of the world is made possible by nothing but the sanction you give it. " -John Galt from Atlas Shrugged, 1957 Quote Share this post Link to post Share on other sites
Dan_Lotz 0 #3 April 6, 2007 Thank you will have to try it out will let everyone know if it holds"He wants to make sure God wants him to live. So he spends a lot of time asking. He brings himself close to the edge.. If God wants to take him, all he needs to do is blow." Dave Eggers Quote Share this post Link to post Share on other sites
