Deisel 38 #1 August 16, 2011 Any thoughts on using the same camera for both activities? It's quite possible to to build a waterproof dive housing to fit jump cameras. But like with so mony other things - just because we can doesn't mean we should. Opinions?The brave may not live forever, but the timid never live at all. Quote Share this post Link to post Share on other sites
billvon 3,085 #2 August 16, 2011 Some issues there - 1) You'd have to vent the casing to allow pressure to equalize. While most watertight housings can resist external pressure, they often have trouble resisting internal pressure. 2) Condensation will be an issue unless you use a dessicant. (Warm humid air on the ground condensed out when taken to colder altitudes.) 3) Housings generally limit the lenses you can use, and you'll want some freedom there. 4) Housings are heavy and that's hard on your neck. Quote Share this post Link to post Share on other sites
LouDiamond 1 #3 August 16, 2011 Depending on your camera, there are not too many options when it comes to serious waterproof cases. The ones that are available are in the price range that makes it unrealistic to buy unless you are doing it professionally. Depending on how deep you are going, the Go Pro would be your best and most economical bet. There is an aftermarket website that sells watertight cases for the Go Pro that are used by the Discovery channel for their shark and crab shows. The name eludes me at the moment but I've posted it here before in the past. If I get back to a desk top I'll edit this post with the link. In the mean time, a search might help you find it. EDIT: www.eyeofmine.com"It's just skydiving..additional drama is not required" Some people dream about flying, I live my dream SKYMONKEY PUBLISHING Quote Share this post Link to post Share on other sites
thebubblegoose 0 #4 September 15, 2011 ContourHD you can mount on a helmet, toss it in it's H2O case and attach it with the goggle strap. I believe it's waterproof to 60 meters in it's H2O case.Thank you, Jason Quote Share this post Link to post Share on other sites
Deisel 38 #5 September 27, 2011 *Update* I ended up taking a GoPro diving. Submerged for about 90 minutes. Max depth was 110' shooting video. 2 days later I took the same camera to altitude a couple of times. All done using the standard case that the camera comes out of the box with. Worked like a champ through low vis at depth and misting fog under canopy.The brave may not live forever, but the timid never live at all. Quote Share this post Link to post Share on other sites
mccordia 74 #6 October 3, 2011 I use the same Sony CX105 for skydiving (in Dbox) and (free)diving (modified Hi8 housing). Old underwater housings for clunky videocameras from back in the days, often easily fit todays more modern/small consumer cameras. You can somertimes but these older underwater housings at bargain prices..JC FlyLikeBrick I'm an Athlete? Quote Share this post Link to post Share on other sites
dragon2 2 #7 October 3, 2011 I stil have one or two of those housings, used them for swoop competitions. Might be this one, but am too lazy to go walk 7 flights of stairs to go check With a lanc-to-halfmoon converter these should work like a charm for the CX series cameras. ciel bleu, Saskia Quote Share this post Link to post Share on other sites
CharlieAt 0 #8 October 4, 2011 just last weekend I used my d80 and cx105 for both scuba and skydiving. I find the waterproof boxes to be more of a hindrance than a help Quote Share this post Link to post Share on other sites
dragon2 2 #9 October 4, 2011 ciel bleu, Saskia Quote Share this post Link to post Share on other sites