Samurai136 0 #1 July 15, 2003 I am packing a Talon 2 (reserve) and the main PC bridal is worn (seriously) at the link in the D-bag, it needs replacement (kill-line pc). Rigging Innovations states in their manual that only R.I. components are approved in their system. Can this be replaced by any kill-line pc or do I need to order a R.I. main pc? The owner really dislikes the 'special' bridal... Thanks! Ken Flanagan Senior Rigger"Buttons aren't toys." - Trillian Ken Quote Share this post Link to post Share on other sites
mjosparky 4 #2 July 15, 2003 You can attach any bridle/PC to the main canopy you wish. Using only their components is referring to TSO'ed components only. SparkyMy idea of a fair fight is clubbing baby seals Quote Share this post Link to post Share on other sites
rigging65 0 #3 July 15, 2003 Only TSO'd components fall under that sort of restriction. Main pilot chute assemblies can be swapped around as a properly certified technician see fit. "...and once you had tasted flight, you will walk the earth with your eyes turned skyward. For there you have been, and there you long to return..." Quote Share this post Link to post Share on other sites
sdctlc 0 #4 July 16, 2003 I talked with Sandy a couple of weeks ago about a new Kill line PC and he suggested a Cazer. he said they were nice and probably would save me some $. I believe the RI specified parts are specific to the harness and reserve system components.... Scott C."He who Hesitates Shall Inherit the Earth!" Quote Share this post Link to post Share on other sites
