DSE 5 #1 December 5, 2007 I'm 20,000 miles away from my FTP, and can't measure the thickness. Anyone know? I believe it's 3/16, but not sure. Found a possible source of very inexpensive CF plate here in Asia, but they're limited on what they make. Quote Share this post Link to post Share on other sites
The111 1 #2 December 5, 2007 Spot, I don't have an FTP but I have measured quite a few of Wes' plates and they vary from 1/8 to 3/16. My CCM top plate is .150... which is between 1/8 and 3/16.www.WingsuitPhotos.com Quote Share this post Link to post Share on other sites
PharmerPhil 0 #3 December 5, 2007 It's not a BH, but I have a piece from a SkySystems Vapor in front of me and it measures exactly 5/32-inches thick. Quote Share this post Link to post Share on other sites
pattersd 0 #4 December 5, 2007 I don't have mine with me here but I do have a CAD model I created and the thickness there is .125". I believe the model is pretty accurate, especially for dimensions that are easily measured. I'll check this evening. Quote Share this post Link to post Share on other sites
jtval 0 #5 December 5, 2007 Quote I'm 20,000 miles away from my FTP, and can't measure the thickness. Anyone know? I believe it's 3/16, but not sure. Found a possible source of very inexpensive CF plate here in Asia, but they're limited on what they make. It's amazing what you can find in a massage palor,huh?I don't have the info you need but I had to post that comment or I wouldnt sleep well at night.My photos My Videos Quote Share this post Link to post Share on other sites
Laszloimage 0 #6 December 5, 2007 Spot It's 3mm. I guess most countries are use metric system anyway... Quote Share this post Link to post Share on other sites
VectorBoy 0 #7 December 6, 2007 Found a possible source of very inexpensive CF plate here in Asia, If its inexpensive enough the thickness, within reason, shouldn't be critical Quote Share this post Link to post Share on other sites
