NoPush 0 #1 June 14, 2004 Hey everyone, Heads up on mounting a DCR-HC65 or HC85 in BoneHead's TRV Box for the TRV50/80 series. You will need to put a 1/2-in plate in the bottom of the D-Box to raise the camera for a proper fit. I used a cheep plastic cutting board and cut a plate about 5 1/2 by 2 3/8 inches. Remove the foam pad on the bottom of the D-Box and mount the plate. I mounted the plate as part of the D-box by extending the screws to 3/4-in from the 1/4-in provided by BoneHead and used the flat nuts provided BoneHead. Use a 3/4-in Flat Boring bit for wood to recess the flat nuts flush with the plate. A little extra foam than what is provided is also needed for a snug fit of the camera. With the plate, the HC65/85 fits great in the D-Box. Cheers! Quote Share this post Link to post Share on other sites
BGill 0 #2 June 15, 2004 completely off topic but whered you get that sticker of the guy on your helmet? thats f'ing hilarious! Quote Share this post Link to post Share on other sites
NoPush 0 #3 June 15, 2004 I thought so too....... Someone a while back emailed me the pic and I had a vinyl shop recreate it from a sticker I bought on the web. Sums up how I feel in the plane waiting to get to altitude. If his other hand was pointing to his head it would be a great logo for BoneHead. My girlfriend got pissed when I put it on my helmet.......go fiqure... I think it was called or titled Boneronie. Do a search. Cheers! Quote Share this post Link to post Share on other sites
