Ringsite post on the Flat Top Pro. Anybody have an articulated one?

[Deuce 1]

I usually land with my site down, but I like to be able to get it out of the way when my goggles fog up, etc.

Is there any kind of swing away post mount for the way the FTP is set up?

[freefalle 0]

Quade, how do you have it mounted, There is a guy out of Deland, Wes, he makes custom helmets and hardware. Anyway he makes a ringsite mount that allows you to push the ringsite horzontally when its not in use. Its really nice and easy to use. If your intrested let me know Ill get you his phone # I dont think his web site is up yet

[Deuce 1]

Quade uses a BatRack.

I think I saw a mount like you are describing on a camera flier's helmet at Eloy. If you could PM me the contact info, I'd be grateful.

JP

[diverds 0]

Or better yet, post the info here for the rest of us to see. I picture would be very cool too.

Skydive Radio

[turtlespeed 226]

Quote

I usually land with my site down, but I like to be able to get it out of the way when my goggles fog up, etc.

Is there any kind of swing away post mount for the way the FTP is set up?

You don't see me post much here, and, No, I don't have much experiance, but I think you saw my setup in Eloy.

Basically it is a Brent cross on a swivel mount.

I mounted it so that the ring swings up and parallel to the "Flat Face" of my BH Pro.
Although I opted a differnt method of "tension release" if it was line wrapped or riser wrapped.

PM me if you are interested.

Clint

Also I have seen where it was mounted on the Inside with the swivel still working - I'm still working out how I would do that.

I'm not usually into the whole 3-way thing, but you got me a little excited with that. - Skymama
BTR #1 / OTB^5 Official #2 / Hellfish #408 / VSCR #108/Tortuga/Orfun