skreamer 1 #1 July 28, 2003 Hi all One of the plastic screws from the mounting plate on my articulating bracket has snapped. Anybody know what diameter they are? (Or where replacements can be bought) Thanks Will Quote Share this post Link to post Share on other sites
jdhill 0 #2 July 28, 2003 You might try sending Bret a PM or email, I'm sure he could tell you... JoshAll that is necessary for the triumph of evil is that good men do nothing. - Edmund Burke Quote Share this post Link to post Share on other sites
skydivexxl 0 #4 July 29, 2003 QuoteTried that. I replaced the plastic w/ metal. both are "6 32" I believ 1/4" long (about $.10 each) Blog Clicky Quote Share this post Link to post Share on other sites
sangiro 26 #6 August 2, 2003 QuoteA.S.S. #4 Will, you may also want to get ASS #5 and #6 while you're at it. I know you're a big ass, so it's always good to have a few spares at hand! (Sorry, I just couldn't resist!)Safe swoops Sangiro Quote Share this post Link to post Share on other sites
TomBeals 0 #7 August 3, 2003 I think that they are nylon. And any good hardware store should carry them in their special nuts and bolts section.Tom Beals Quote Share this post Link to post Share on other sites
skreamer 1 #8 August 3, 2003 You just broke rules nr. 1 and 4. Now could you please ban yourself. Quote Share this post Link to post Share on other sites
base704 0 #9 August 6, 2003 Replacing the nylon screws with metal is an option, but I think it defeats the whole intended purpose of the nylon screws being used in the first place... ?did that make any sense? I beleive that nylon was used because it may "give" and break if "something" were to snag on the site or the bracket itself... Anybody?You can get a lot more done with a kind word and a gun than with a kind word alone. Quote Share this post Link to post Share on other sites
