JayhawkJumper 0 #1 March 31, 2003 OK, I've been doing some modifications on my camera helmet lately for installing a still etc... and considering I'm just one of those people who loves to build stuff just to see if they can do it successfully, I think I might try to build a camera helmet for myself out of fiberglass. Long story short, if I build a rear entry helmet, would it be possible to attach the bonehead cutaway to it? If you have this new cutaway on your bonehead flat-top, let me know if this looks like something that you could be fitted to another helmet. Quote Share this post Link to post Share on other sites
newshooter12 0 #2 March 31, 2003 there are some good pictures on this forum of that. you might try doing a search for the cutaway pix. matt Quote Share this post Link to post Share on other sites
tictoc 0 #3 April 1, 2003 It could be done very easely.-------------------------------------------------------- Some one must go to the edge for others to be able to find it. But if you go be sure you can make it back. Quote Share this post Link to post Share on other sites
CaTo 0 #4 April 2, 2003 the only thing you need to be sure of is that the hinge fits... I just received my cutaway system from bonehead, and fixed it on my helmet. Although they (bonehead) does not bother to give you ANY instructions, not even a picture, after an half an hour of drilling (extra holes for the loop) and sawing ( the bone could not close anymore, you have to make some space there) it is now attached, and working (well... on the ground it is :-) Caren Quote Share this post Link to post Share on other sites
