0
grega

Reserve in Mirage G4

Recommended Posts

Quote

Would it be possible to pack a bigger reserve than recommended in mirage containers. We, for example were able to pack a reserve one size bigger in javelin and atom without much of a problem :)



talk to Bill... info@miragesys.com but they specifically state, one size smaller than designed -- they based their container volume on PD canopies, however, so a "bigger" reserve with less reinforcement tape and stuff may have a similar pack volume. Best to check with them.

Share this post


Link to post
Share on other sites
Quote

Would it be possible to pack a bigger reserve than recommended in mirage containers. We, for example were able to pack a reserve one size bigger in javelin and atom without much of a problem :)



On Mirage website it says that "you can safely drop one size on main and one on reserve. Larger reserves will NOT fit".

Share this post


Link to post
Share on other sites
Quote

On Mirage website it says that "you can safely drop one size on main and one on reserve. Larger reserves will NOT fit".


Heh. I have a Mirage G3 UNISYN in an M4 size. For a reserve, it is supposed to hold a PD-160R or DM-181. I have a Tempo 210 in my reserve tray along with a Cypres. That Tempo packs significantly bigger than a PD-160R (It's closer in size to a PD-176R) and it fits in there just fine and all my flaps are flat.

I wouldn't try to go more than one size higher but the tradeoff I have for having a bigger reserve is that two riggers were unable to pack it (The one I use now can pack it very easy so it seems to be more of a finesse issue) and the reserve area is very stiff so I lose a little flexibility in the container.

Check with Bill at Mirage. He's a nice guy and he'll make sure you have the right info.

Kris
Sky, Muff Bro, Rodriguez Bro, and
Bastion of Purity and Innocence!™

Share this post


Link to post
Share on other sites
If you have big container (170-170 or so) - its possible, and wont look and fit bad... But, in small sizes - I dont reccoment it. I pack 128 Techno to tray for 113 PD - it is REALY tight.... (pull test OK... ) and, I dont like rig look like that, but it was customers oddity...
Lexa

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

0