cloud9 0 #1 November 29, 2001 Ok gang I could sure use some help with this one. I have an original factory diver with the flip up lens (not an oxygen). I lost one of the screws and washers that hold the face shield in place. I contacted the factory and they don't have any left. Of course they don't make this helmet any more. They suggested contacting some of the dealers like Sunshine Factory. Well I called them, square one, and action air with no luck. I looked locally for something that would work. The only bolt I found that would fit has a hex head on it and the helmet looks like frankenstien with the bolts out the side of the head.Anybody have any ideas? Anyone know of a dealer that might have some? I would also like to find some of the rachets cause it looks like if something breaks I may be out of luck.Any help would be appreciated. Quote Share this post Link to post Share on other sites
TheMarshMan1 0 #2 November 29, 2001 Maybe try this link....its got tons of different types of fasteners- its where we always get all our hardware at the FBO i work for, hope it helps...http://www.ddaircraft.com/main.html-Marshall Quote Share this post Link to post Share on other sites
johnny1488 1 #3 November 29, 2001 I know right were to go but yer probably not in NY. I personally would try a machine shop or tool supply house. If they dont have what you need they could make one. By a long shot if you have access to a MSC catalog go with them. Look for them on the web if you want, Manhatten supply company. Good luckJohnny Quote Share this post Link to post Share on other sites
scotts 0 #4 November 29, 2001 try a motorcycle shop that sells full face helmets. bring your's with you. you might get lucky. Quote Share this post Link to post Share on other sites
cloud9 0 #5 November 30, 2001 Hey guys all good ideas, thanks for the replys Quote Share this post Link to post Share on other sites
