0
skydive4play

RISER LOOPS

Recommended Posts

I OWN A ODYSEEY AND HAVE FOUND THAT MY DIVE LOOPS SEEM TO BE TOO LOW. I HAVE GIVEN UP ON THEM AND NOW JUST PULL ON THE END OF THE RISERS WHERE MY SOFT LINKS ARE FOR A GOOD DIVE BEFORE MY SWOOP. ANY SUGGESTIONS ON WHAT I CAN HAVE MY RIGGER DO,,,,,, SHOULD I JUST HAVE THEM MOVED UP OR WHAT?

Share this post


Link to post
Share on other sites
For one, turn off the capital letters. Online thats considered a form of yelling.
For the risers, be carefull of removing stitches from the risers. Each needle hole in the riser weakens the riser. You might want to call Sunpath and make sure you have the right length risers. Are you using 17 inch? 21? 23? If you have 17 I'd deffinatlly suggest the 21 inch.
A rainy day at the DZ is better then a Sunny day at work

Share this post


Link to post
Share on other sites
As answered in the first reply: you need some longer risers if you don't like where your dive loops are. I think the loops on my shorty triples are kind of low, but I accept them gladly in trade for me being able to easily reach my slider. I have another set that are two inches longer that have a nicer dive loop height, but it's a hassle to reach the slider on those.
Chuck
"I'd rather have a bottle in front of me than a frontal lobotomy"

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

0