Hazarrd 1 #1 January 5, 2004 I just bought a tube of Shoe Goo for my booties. I'm trying tothink of the best way to apply it. Is there a good way to "spread" it around the bootie? I'm not really sure how to go about this. Thanks. .-. Quote Share this post Link to post Share on other sites
Hooknswoop 19 #2 January 5, 2004 use a whole lot, and spread it quick with a finger before it sets up or it'll be an even bigger mess than it needs to be. Do this outside and then stuff the shoes you normally jump in into the boties. Derek Quote Share this post Link to post Share on other sites
pilotdave 0 #3 January 5, 2004 HERE is a thread that might help. Dave Quote Share this post Link to post Share on other sites
jdthomas 0 #4 January 5, 2004 I have used so many tubes thru the years and I have a few steps to use it that might help. Stuff the inside of what ever you are going to apply the gunk to, this is to make it rigid and easier to apply. I have used toung depressors but have found that ice cubes work well if you have the right size and wear rubber gloves no matter what you use. And your work will always look better then it really is if you inhale deeply a few times during the process.www.greenboxphotography.com Quote Share this post Link to post Share on other sites
Hazarrd 1 #5 January 5, 2004 Quote And your work will always look better then it really is if you inhale deeply a few times during the process. haha. i just did it, and the whole room smells so bad. i shut the door and put a fan in there. man that stuff is sticky! .-. Quote Share this post Link to post Share on other sites
airgord 1 #6 January 5, 2004 It's really good on toast. Quote Share this post Link to post Share on other sites
Vertifly 0 #7 January 5, 2004 I prefer Model Glue, it doesn't give me as much of a headache afterward. Quote Share this post Link to post Share on other sites
happythoughts 0 #8 January 5, 2004 First, apply to the seam. The seam is the first thing to get frayed. Then put it on the toe/front of the bootie to prevent friction wear. I also put some small round dots of it on the bottom to provide traction when my foot is in the door. Whether floating or diving, it helps. Quote Share this post Link to post Share on other sites
ZoneRat 0 #9 January 5, 2004 And when the neck liner comes unglued from your Z1, shoe goo works great at sticking it back in. Soaking the tube in hot water is a stroke of utter smartness... thanks for that. (Damn if there's not a trick to absolutely everything...)“There are more things in Heaven and Earth, Horatio, than are dreamt of in your philosophies.” Quote Share this post Link to post Share on other sites
