Margusja 0 #1 February 11, 2004 Hi, in my dropzone is one vector2, but I cant found any making year. How I can to know in this case when is this gear made? Quote Share this post Link to post Share on other sites
Nightingale 0 #2 February 11, 2004 get the serial number and ask vector?? Quote Share this post Link to post Share on other sites
SkydiveMonkey 0 #3 February 11, 2004 Clicky____________________ Say no to subliminal messages Quote Share this post Link to post Share on other sites
Chrisky 0 #4 February 12, 2004 Did you check all the tuck-aways in the flaps, the pocket for the reserve packing card etc? Usually there's a label with DOM and Serial-# on it stitched to the rig.The mind is like a parachute - it only works once it's open. From the edge you just see more. ... Not every Swooper hooks & not every Hooker swoops ... Quote Share this post Link to post Share on other sites
mjosparky 4 #5 February 12, 2004 Some where there is a TSO label, look on one of the reserve risers, and this label must have the ser. # and the DOM among other things. If this label is not on the rig, it is not legal to jump. SparkyMy idea of a fair fight is clubbing baby seals Quote Share this post Link to post Share on other sites
GravityGirl 0 #6 February 12, 2004 Just FYI. Your profile indicates you like to freefly. I wouldn't recommend Vector2 for freefly. ~~~~~~~~~~~~~~~~~ Peace and Blue Skies! Bonnie ==>Gravity Gear! Quote Share this post Link to post Share on other sites
payback462 0 #7 February 12, 2004 Quote Just FYI. Your profile indicates you like to freefly. I wouldn't recommend Vector2 for freefly. dont worry, he has 100some jumps and flies a canopy loaded at 1.7 he must be invincible Quote Share this post Link to post Share on other sites
Margusja 0 #8 February 12, 2004 It's not my gear. Quote Share this post Link to post Share on other sites
usskydiver 0 #9 February 12, 2004 The DOM and S/N for a Vector II are tucked away in the yoke under the outside reserve flap. This is also where the packing data card is usually kept. Tim FAA Master Rigger Quote Share this post Link to post Share on other sites
