Recommended Posts
billvon 3,107
Sort of. I would recommend not using it if you are using anything more than a really basic (i.e. small) and streamlined camera setup. But I'd also recommend doing an intentional cutaway or two. It's a good training tool in any case, and is even more important if you decide to forego the RSL and take intentional delays after cutaways.
ph8068 0
So, the idea of disconnecting your RSL once your main has deployed correctly seems a little crazy! Now you've used an RSL where you don't one and disconnected it when you do want one!
Anyone ever considered connecting their RSL under canopy!!!! This would actually seem quite logical.
As for getting dragged on the ground, learn to collapse your canopy then cutting away is not necessary. Pull one brake line in until you get fabric through the slider grommit, whilst running around the canopy to the downwind side.
Paul.
Hooknswoop 19
QuoteAgreed. But unless you train under accurate conditions (i.e. hanging harness, spinning, practicing BOTH getting stable and not getting stable depending on what your altimeter says) you'll do what you plan to do no matter what your altitude. And if you are spinning on your back at 500 feet, and you cut away, you will try to get stable before deploying your reserve - especially since you won't see the ground. We do what we train to do.
That is how EP's should be trained, for experienced jumpers. I always trained to cutaway, get stable if altitude permits, then pull the reserve. There is no attitude, either under a malfunctioning canopy or in free-fall, where I cannot see the ground and use it for altitude reference.
Derek
billbooth 10
falxori 0
QuoteBut I'd also recommend doing an intentional cutaway or two.
actually i thought of doing that but i doubt i'll have access to a 3 chute rig here in israel anytime soon.
too bad, i should have tried it when i was in CA last month, oh well.
anyway, thanks Bill

O
Hooknswoop 19
QuotePlease note that the above letter about RSL's from the Relative Workshop was prior to the introduction of the Skyhook RSL. The Skyhook was designed to remove most, if not all of the "problems" associated with conventional RSL's. The Relative Workshop now recommends Skyhook RSL's to all customers, regardless of experience level. Jumpers who do a lot of CReW might be the only exception. However, no device is perfect, and everyone's best course of action is not to get so low that you need an RSL in the first place. Just remember...an RSL is sort of like a gun. If you really need it, but don't have it, you'll never need it again.
I agree that the Skyhook fixes almost all the problems associated with the RSL. I wouldn't have a problem jumping a Skyhook-equipped rig, but probably wouldn't just because I enjoy taking a delay after cuting away. I would want a Skyhook on a tandem rig though.
Derek
fundgh 0
It seems that there is a grey line between an experienced jumper and one who has had a couple cutaways. I have seen many jumpers with hundreds and thousands of jumps without a cutaway. Should they use the RSL?
billvon 3,107
Relative Workshop has an excellent system they take to large boogies; if you ever get the chance I highly recommend it. I have a cutaway system originally designed by none other than Hooknswoop himself that I use on occasion, but as it's not the same 'action' as a regular rig (i.e. I don't cut away with the cutaway handle) it's not quite as good as the RW rig.
>It seems that there is a grey line between an experienced jumper
> and one who has had a couple cutaways. I have seen many jumpers
> with hundreds and thousands of jumps without a cutaway. Should
> they use the RSL?
As always it's up to them. Even highly experienced jumpers have had no-pull fatalities from cutting away and not pulling the reserve, so an RSL may still be useful to them.
obelixtim 150
I reckon if you had a round reserve you'd only do it once....the opening shock would make your eyes water.....and your toes curl!!!......
billvon 3,107
I think there are some serious minuses concerning training to NOT immediately open the reserve. I wouldn't do that until someone had a lot of experience, and could be relied upon to never lose altitude awareness, not revert to old training under pressure etc.
councilman24 37

No, I really know you need to clear the other fools, errr, CRW dogs, that might be following you.
Hmmm, do pack the reserve with the nose rolled??

Just KIDDING all you newbies.
And to the thread in general...
And I'm more worried about the 600 foot canopy collision, cutaway, and impact at line stretch as a good reason for an RSL than a 2500 foot partial. As well as the newbies that cann't figure out how to use their eyes to find the silver handle.
Terry Urban
D-8631
FAA DPRE
Hooknswoop 19
QuoteWhats the idea of doing a long delay after cutting away???.....silly idea I think.....horsing around in the middle of an emergency doesn't strike me as a good idea......plus giving your reserve, and yourself a terminal opening when you don't need to doesn't make sense at all.......shouldn't you save your life asap??.......
"long delay", "horsing around"? No, no long delays, no horsing around. I never said that, nor did I say terminal reserve opening. Cutaway, get stable, fire the reserve. Right, saving your life is the important part. Wrapping the reserve PC bridle around you is not going to save your life.
Derek
"Facts about the "Reserve Staticline Lanyard"
Posted Thursday, October 15, 1998
By Relative Workshop
Facts about the "Reserve Staticline Lanyard"Lately there has been a big push towards the use of the reserve staticline lanyard (RSL) for experienced jumpers.
Most proponents of the RSL have only been dwelling on the positive aspects of the RSL without considering the negative consequences.
The Relative Workshop wants to educate each jumper regarding the pros and cons of the RSL system so you will be able to make an informed decision about this popular, yet controversial modification.
For those of you unfamiliar with the RSL system, a short description is in order. The RSL is a simple lanyard connecting one or both of the main canopy risers to the reserve ripcord. In the event of a main canopy malfunction, and following a successful breakaway, the reserve ripcord is pulled as the main risers depart with the released main canopy.
In essence, the RSL indirectly connects the breakaway handle to the reserve ripcord handle. Unfortunately, this simple lanyard can easily complicate a routine emergency for those who are more than capable of handling the problem manually.
The RSL has gained much of its notoriety through its use on student equipment. The RSL is ideal for students because the probability is high that a student might breakaway from a malfunction lower than the recommended altitude, and delay longer than necessary before deploying the reserve. Having the reserve deploy in a unstable body position, while far from ideal, is preferential to not having the reserve deploy at all. Waiting for the AAD to fire if the breakaway is extremely low is a chancy situation at best. For these reasons, the RSL is quite compatible for student gear and most instructors would probably agree!
RSL's work great on tandem systems as well. The tandem instructor really has his hands filled during a malfunction so the speedy deployment of the reserve is a big advantage. Stability after a breakaway is generally not a problem as the tandem pair have inherent stability qualities due to the positioning of the passenger and tandem master. If the tandem master has properly prepared the passenger's body position, a tandem breakaway has a greater potential for instant stability than a solo breakaway.
Both student and tandem jumps are carried out at higher altitudes and rarely involve other jumpers in the same airspace, minimizing the chance of canopy entanglements which can complicate matters severely.
RSL's and the experienced jumper - Pros vs. Cons
Remember, the RSL does one thing and one thing only: It will activate (providing it does not physically fail) the reserve container following a main canopy breakaway. That's it! Now lets talk about the disadvantages of the RSL.
1) Most jumpers don't realize that utilizing a RSL correctly requires changing their emergency procedures. Why? The reason is simple: Most RSL systems offer the ability to disconnect it from the riser. If it's disconnectable, then there will be situations that may require a disconnection before proceeding with the breakaway. An obvious one that comes to mind is a canopy entanglement with another jumper. If one or both jumpers have an RSL and they mindlessly breakaway without considering the consequences, they might very well find themselves entangled again, possibly for the last time! Canopy entanglements are happening more frequently now than ever before due to several reasons:
A) More inexperienced jumpers engaging in larger RW formations. B) The recent popularity of ultra-fast zero porosity canopies. The result is: Skies crowded with more inexperienced jumpers flying faster canopies.
Emergency procedures for systems fitted with RSLs would change in the following manner: Before the breakaway, you must ask yourself (considering your present malfunction) if an immediate reserve deployment will be in your own best interest. If not, the RSL must be released before proceeding with the breakaway.
NOTE: Anytime the RSL remains active during a breakaway, the jumper should automatically plan on pulling the reserve handle anyway just in case the RSL connection fails to activate the reserve container for whatever reason. This lack of awareness regarding the need to back up the reserve pull manually is an increasing and disturbing trend among some of today's jumpers.
2) The average jumper will take more than several seconds to analyze and determine if the RSL disconnection is necessary. This can obviously consume valuable time. No doubt the average jumper would be better off handling the emergency manually by pulling both handles, which is not a difficult task.
3) Lets examine the cause of malfunctions in the first place. The biggest culprits are improper packing and rigging, or bad body position during deployment. (Bad body position can be defined as shoulders not perpendicular to the relative wind.)
s almost impossible to be stable within the first second and a half following a breakaway from a malfunctioning high performance main canopy. Therefore, the typical RSL user is most likely unstable during the reserve deployment.
Instability causes malfunctions and allowing the RSL to open the reserve container for you will increase the chance that the reserve canopy will malfunction as well. One might argue that this would be a rare occurrence, but why would an experienced jumper take the chance? Some would consider this an unacceptable risk!
4) CRW enthusiasts, for the obvious reasons mentioned in point 1, do not want or need a RSL. For those that have one, it should be disconnected prior to boarding the aircraft on a planned CRW jump.
Freefall videographers should never jump with an active RSL systemThe last thing a camera-person needs is the reserve deploying while they're unstable. Just recently in France a fatality occurred when a RSL-activated reserve canopy entangled with the jumpers helmet-mounted camera equipment.
6) The RSL will not work during a total malfunction of the main container, and do not assume that it can take the place of a functioning, properly calibrated automatic activation device. An RSL is not an AAD.
Summation
The RSL system was developed over 25 years ago and found its proper place on student equipment. Due to the fact the skydiving community encounters several deaths each year attributed to the "no-reserve-pull-following-a-breakaway scenario," we have many individuals who feel the RSL is the answer for the experienced jumper. Our belief is quite simple: If every jumper had a RSL, then the amount of RSL related deaths each year would be many more than we now encounter with no-pull situations.
Naturally we have tremendous concern whenever someone wants to take a simple, 3-handle system and turn it into some complicated apparatus in an attempt to make up for the inadequacies of the poorly trained or ill-prepared jumper. We believe if you stick to the basics, constantly rehearse your emergency procedures, and assume you'll have a malfunction on every jump - you'll be much better off.
Remember: The RSL is not a safety device for experienced jumpers because it takes more time to operate it correctly than to pull the breakaway and reserve handles manually. Now that you have been presented with the all the facts, we hope you'll make the right decision for yourself regarding the RSL.
If you would like to have a consultation on your personal skydiving equipment needs, please call Relative Workshop at anytime during the hours of 8am - 6pm EST. We have a highly experienced staff of riggers and instructors who are anxiously awaiting to assist you. If we don't have the answers to your questions, we probably know who does! Remember, we're here to help you make the right decisions concerning your skydiving equipment and its proper use."
Derek
Share this post
Link to post
Share on other sites