linestretch 0 #1 October 25, 2004 TM's, have you ever had, or almost had you hand pinched between the risers? It's gotten me once, and my poor buddy here got it BAD. Something to think about.....if your cutaway hand is stuck in the risers, is the student gonna cutaway for you?... check this outmy pics & stuff! Quote Share this post Link to post Share on other sites
Praetorian 1 #2 October 25, 2004 Just me .. or is the link nonfunctional? Good Judgment comes from experience...a lot of experience comes from bad judgment. Quote Share this post Link to post Share on other sites
linestretch 0 #3 October 25, 2004 should work. It's of the guys opening.my pics & stuff! Quote Share this post Link to post Share on other sites
catfishhunter 2 #4 October 25, 2004 doesn't work MAKE EVERY DAY COUNT Life is Short and we never know how long we are going to have. We must live life to the fullest EVERY DAY. Everything we do should have a greater purpose. Quote Share this post Link to post Share on other sites
linestretch 0 #5 October 25, 2004 ugh, try this.... http://us.f1f.yahoofs.com/bc/16025028/bc/My+Documents/linetwists.wmv?bfJ1SfBBbzGhpyiDmy pics & stuff! Quote Share this post Link to post Share on other sites
catfishhunter 2 #6 October 25, 2004 HOLY SH*T!!!!! That looked like one helluva ride!!!! MAKE EVERY DAY COUNT Life is Short and we never know how long we are going to have. We must live life to the fullest EVERY DAY. Everything we do should have a greater purpose. Quote Share this post Link to post Share on other sites
timmyfitz 0 #7 October 25, 2004 I had something similar this summer on an Icarus tandem canopy. It twisted up shortly after relasing the drogue almost 3/4 of the way up the lines but the canopy was square and flying straight. The twist didn't seem to want to come out at first even with me kicking and trying to spread the risers. I had the student look up, explained what was going on and then instructed him to assist me in kicking out of the line twist. It took a little effort and time but we finally got out. There was a brief period of time were I had considered cutting away cause the twist didn't seem to want to come out. Glad I didn't. Quote Share this post Link to post Share on other sites
