dorel 0 #1 October 21, 2013 Hi I am a 18 years experience skydiver, 3 years ago I started doing rigging for me not professional , now i do the lineset for my stiletto 120scf from vectran 750 ,and I encountered some difficulties to find all sizes from pd line trim chart. I attach a scheme dimensions a1 b1 c1 d1 lines, but of cours i nead for all strings of linesA2.... , A3......, A4....., A5...... Quote Share this post Link to post Share on other sites
Quagmirian 40 #2 October 21, 2013 I've had this same query myself. I rang up PD to ask about it and they won't tell where the cascade is for this exact reason; they don't want you manufacturing linesets. The only solution they suggest is to take a measurement from an existing canopy that is still in trim. Quote Share this post Link to post Share on other sites
likestojump 3 #3 October 21, 2013 QuagmirianI've had this same query myself. I rang up PD to ask about it and they won't tell where the cascade is for this exact reason; they don't want you manufacturing linesets. The only solution they suggest is to take a measurement from an existing canopy that is still in trim. and don't forget to account for the shrinkage due to the fingertrap (i.e. when measuring lengths on an already built lineset, remember that you are dealing with FINISHED dimensions) Quote Share this post Link to post Share on other sites
dorel 0 #4 April 7, 2014 I managed to make the set of lines stiletto120 from vectran750 many tests much math and measurements but I finally met succeed I have already made seven jumps with her opens and flies beautifully and i have 1.74 WL i am in maxWL Quote Share this post Link to post Share on other sites
