0
goose491

Hello? Bonehead Composites? HellOoo?

Recommended Posts

My folks wanted to buy me a helmet for christmas this year but as they are Whuffo's, my mother gift-wrapped one of her old Equestrian helmets with a note saying I was to pick out the real one and it would be on it's way...... COOL!!!! I decided I want a Bonehead Mindwarp. I've since emailed Bonehead composites and a dealer in Montreal (closest dealer)... no reply. It seems there is nobody at Bonehead either 'cause there be no answer on the phone. Damn! I had a few questions I wanted to ask about the helmet.

Anybody have any suggestions on how to get a Helmet to Ontario?



My Karma ran over my Dogma!!!

Share this post


Link to post
Share on other sites
  Quote


Yeah, tell them to MAIL it to ya LOL, sorry couldn't resist. :D:D



Duh :D



  Quote

I own a Mindwarp, what's your question?



Well, they stopped making the "Pimp Daddy" and the pics I've seen of this model have that poor (IMHO) outer audible pocket. I just wanted to make sure I can fit an audible inside the helmet. Also, I wanted someone to describe exaclty how to place the measuring tape (around my head) so as not to get screwed for size.



My Karma ran over my Dogma!!!

Share this post


Link to post
Share on other sites
Well, the audible pocket is INSIDE now, and it has a elastic band to hold it plus the padding.

To measure your melon, place the tape around your head just like a baseball cap, getting the end of the tape on the center of your forehead. I don't know if that's clear.
__________________________________________
Blue Skies and May the Force be with you.

Share this post


Link to post
Share on other sites
  Quote

Well, they stopped making the "Pimp Daddy" and the pics I've seen of this model have that poor (IMHO) outer audible pocket. I just wanted to make sure I can fit an audible inside the helmet. Also, I wanted someone to describe exaclty how to place the measuring tape (around my head) so as not to get screwed for size.



Find a Pimpdaddy the new mindwarp makes you look like a walking penis IMHO.

Everytime I see one on someone it makes me giggle it's probably because I'm twisted but thats my .02

Share this post


Link to post
Share on other sites
  Quote

It seems there is nobody at Bonehead either 'cause there be no answer on the phone.


Note - Bonehead's is in California and they usually don't start working until 9 am. Even though it may be past 9 am where you are... out here in Cali we may still be snoozin'.

It's after 9 am here now. Try again.

Share this post


Link to post
Share on other sites
  Quote


To measure your melon, place the tape around your head just like a baseball cap, getting the end of the tape on the center of your forehead. I don't know if that's clear.



Yeah, but at the sides of your head, does the tape rest on top of your ears like a ball cap or a few inces above to keep the tape-ring horizontal?



My Karma ran over my Dogma!!!

Share this post


Link to post
Share on other sites
  Quote


Find a Pimpdaddy the new mindwarp makes you look like a walking penis IMHO.

Everytime I see one on someone it makes me giggle it's probably because I'm twisted but thats my .02



Ah Snap! does anyone have a pic of someone wearing one? The pic of just the helmet on the site doesn't really give me any indication of what it looks like on a human head (I'm a human).... Don't really want to look like a penis :$



My Karma ran over my Dogma!!!

Share this post


Link to post
Share on other sites
a # of company's don't come back from vacation until the 6th of the year each new year.

Accelerate hard to get them looking, then slam on the fronts and rollright beside the car, hanging the back wheel at eye level for a few seconds. Guaranteed reaction- Dave Sonsky

Share this post


Link to post
Share on other sites
  Quote

Find a Pimpdaddy the new mindwarp makes you look like a walking penis IMHO.

Everytime I see one on someone it makes me giggle it's probably because I'm twisted but thats my .02



Agreed. My ultra-custom flamed mindwarp is, of course, the "pimp" variety. I could care less that the audible pocket is outside; the basic shape of the older helmets is FAR superior in my opinion. A perfect Mindwarp would have the older shape with the "pimp" velvet, but either the even older, squared off internal pocket, or the new "teardrop" internal pocket. The "pointy head" look of the newest mindwarps, Optik, and boomerang make me nuts.

Chuck
"these flames make me go faster"

Share this post


Link to post
Share on other sites
If that's the case, can anyone recommend a helmet similar to the PimpDaddy styled Mindwarp? What does everyone wear?

I don't want to buy a used helmet and The audible absolutely has to be inside (I jumped with a friends pimp daddy. Couldn't hear the audible and was scared of getting it slapped off by a riser)



My Karma ran over my Dogma!!!

Share this post


Link to post
Share on other sites
  Quote

Find a Pimpdaddy the new mindwarp makes you look like a walking penis IMHO.

Everytime I see one on someone it makes me giggle it's probably because I'm twisted but thats my .02



I think they look like crap. I have heard ALOT of comments about their new design not being visually pleasing. I'm going to turn my trusty "pimp daddy" into a camera helmet but this means that I will have to find another helmet for the times I don't want to jump a camera, sorry Bonehead[:/]

On a side note, and not to say I don't like BH products cause I do think they are well made and dependable, but it seems they are straying away from what the customers seem to want? I remember when they changed to the external audible pocket and hearing alot of rants about it (I think the reason they gave for the change was extra expense). Then they started with their "one size fits none, well maybe one" D-Box, which I have heard alot of people bumming about. Now we got a new total redesign of the Mindwarp with the internal audible pocket back. Again, not bashing BH but just some things I have noticed.

Share this post


Link to post
Share on other sites
  Quote

  Quote


To measure your melon, place the tape around your head just like a baseball cap, getting the end of the tape on the center of your forehead. I don't know if that's clear.



Yeah, but at the sides of your head, does the tape rest on top of your ears like a ball cap or a few inces above to keep the tape-ring horizontal?



Above your ears.
__________________________________________
Blue Skies and May the Force be with you.

Share this post


Link to post
Share on other sites
  Quote


I think they look like crap. ....I will have to find another helmet for the times I don't want to jump a camera, sorry Bonehead[:/]



What do you think you will get? I really dig the quality of the bone heads I have seen but I want to avoid looking like a giant, free-flying penis at all costs :)
What other helmets have the same quality, internal audibles, and a pimpdaddyish look?



My Karma ran over my Dogma!!!

Share this post


Link to post
Share on other sites
  Quote

What other helmets have the same quality, internal audibles, and a pimpdaddyish look?



Well, you COULD get a pro-tec, cover the outside with crushed velvet, and add a feather. Maybe a couple of belt-looking straps across the top, too. Pimp as hell ;)
Wendy W.
There is nothing more dangerous than breaking a basic safety rule and getting away with it. It removes fear of the consequences and builds false confidence. (tbrown)

Share this post


Link to post
Share on other sites
  Quote

  Quote

What other helmets have the same quality, internal audibles, and a pimpdaddyish look?



Well, you COULD get a pro-tec, cover the outside with crushed velvet, and add a feather. Maybe a couple of belt-looking straps across the top, too. Pimp as hell ;)
Wendy W.


I DIG that baby! I'll make the crushed velvet a dark purple, the feather sky-blue....And I think this helmet will need a rim and a band of leoppard-print. Cool B|



My Karma ran over my Dogma!!!

Share this post


Link to post
Share on other sites
  Quote


I DIG that baby! I'll make the crushed velvet a dark purple, the feather sky-blue....And I think this helmet will need a rim and a band of leoppard-print. Cool B|



Awesome, then get a PhD and you are all set :D

(PhD: Pimpin' Ho's Degree) :ph34r::ph34r:
__________________________________________
Blue Skies and May the Force be with you.

Share this post


Link to post
Share on other sites
  Quote

Then they started with their "one size fits none, well maybe one" D-Box, which I have heard alot of people bumming about.


Someone needs to tell the camera manufacturers to quit changing the dimensions of their cameras with every new model upgrade. That'd solve that problem right there.

How cost effective do you think it is for a skydiving equipment company to have to redesign their product for each new camera that comes out? Know how much time and effort goes into designing and building a box specific to one camera model? It's not like they're going to sell thousands of boxes for one camera model.

Maybe some people should quit "bumming" and try designing, building and marketing a box themselves?

Share this post


Link to post
Share on other sites
  Quote


Maybe some people should quit "bumming" and try designing, building and marketing a box themselves?



This is the way to go really. I've yet to see a manufactured camera box which takes the cake over one built personaly by the jumper.


Now, if I could just get some suggestions? What does everyone recommend?



My Karma ran over my Dogma!!!

Share this post


Link to post
Share on other sites
  Quote

Someone needs to tell the camera manufacturers to quit changing the dimensions of their cameras with every new model upgrade. That'd solve that problem right there.



Agreed!

  Quote

How cost effective do you think it is for a skydiving equipment company to have to redesign their product for each new camera that comes out? Know how much time and effort goes into designing and building a box specific to one camera model? It's not like they're going to sell thousands of boxes for one camera model.



I know what is involved in tooling changes and I agree there is not a huge market for these boxes. A different box for each camera model would not be required, they have made boxes that fit several cameras nicely in one box.

  Quote

Maybe some people should quit "bumming" and try designing, building and marketing a box themselves?



This would be a good idea, and there are some that are stepping up to the challenge.

Share this post


Link to post
Share on other sites
The review here on the site was written by SkydiveMonkey, you could try PM'ing him.

-- Toggle Whippin' Yahoo
Skydiving is easy. All you have to do is relax while plummetting at 120 mph from 10,000' with nothing but some nylon and webbing to save you.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

0