tsalnukt 1 #1 October 6, 2012 Switched on a Tandem Cypres 2 this morning and before it went to "0" a 13 flashed on the screen. It's not the date of the next service, just a plain old "13". Does anyone know what this means??? I can't find anything in the manual. Thanks for the help. Quote Share this post Link to post Share on other sites
stratostar 5 #2 October 6, 2012 Be careful that may be one of those MS13 Mexican thug units..... If it's not 1111 or 2222 or 3333 then Quote If other than these three described numbers appear in the display, or if the unit switches itself off and can not be switched on again, please contact Airtec or SSK. Please record the error code number! you can't pay for kids schoolin' with love of skydiving! ~ Airtwardo Quote Share this post Link to post Share on other sites
tsalnukt 1 #3 October 6, 2012 Yeah, but it's saturday and I can't get a hold of Airtec or SSK on the weekend so I thought I would try the next best thing...Dropzone.com. Definitely not one of the crappy "black market" units. Anyone else have an idea? it also has a little "in" underneath the "13". Thanks again. Quote Share this post Link to post Share on other sites
pchapman 279 #4 October 6, 2012 Quote it also has a little "in" underneath the "13". Ah, that's the "in" that shows up in the small words on screen bottom " next maint. in". If you didn't just see the screen for a split second and miss perceiving the first digits of the maintenance date, or the screen wasn't half obscured, or there's no apparent damage to the LCD screen.... then it is a bit of a mystery to me! If you cycle the unit off and on, did it come up again?? (Obviously one would rightly hesitate to jump any AAD if an error seemed to have happened, even if the error cleared next time around.) Quote Share this post Link to post Share on other sites
tsalnukt 1 #5 October 6, 2012 That's what I thought as well but there were no other numbers or "next maint" included. I'm gonna cycle it up again and have another look in a bit. Quote Share this post Link to post Share on other sites
timgaines 0 #6 October 6, 2012 Sounds like the maintenance due warning came up (it's the start of October so kinda makes sense...) but part the screen was obsucred/broken. If the left hand side is damaged you would never really notice during normal use as there are normally no digits there and what you are missing is the month for service... Is your Cypres DOM 04/09 or 04/05 by any chance...? Edit to add, this will happen everytime you switch it on until you get it serviced... Quote Share this post Link to post Share on other sites
floormonkey 0 #7 October 8, 2012 http://www.cypres2.com/userguide/CYPRES_2_users_guide_english.pdf Page 22 page 25 Specific to what you are seeing...Page 29, paragraph 4-the paragraph by the clock image Quote Share this post Link to post Share on other sites
Abedy 0 #8 October 8, 2012 Quote http://www.cypres2.com/userguide/CYPRES_2_users_guide_english.pdf Page 22 page 25 Specific to what you are seeing...Page 29, paragraph 4-the paragraph by the clock image FIFY, made it clickableThe sky is not the limit. The ground is. The Society of Skydiving Ducks Quote Share this post Link to post Share on other sites
woppyvac 0 #9 October 8, 2012 When is the manufacture date? Any update from Airtec?Woot Woot! Quote Share this post Link to post Share on other sites
