trixonik 0 #1 February 22, 2010 I just purchased a used Reflex container with a Triathlon 160 / DashM-150. Unfortunately the rig is too small. It was made for someone who was 5'7 and I am 5'11 with a longer torso. I jumped the rig, but I wasn't comfortable in it and I wasn't able to tighten the leg straps as much as I would like because it pulled down too much on my shoulders. There are two pieces of webbing that run in between the hip rings and the rings on the main shoulder straps and I'm wondering if those could be replaced to help the rig fit me better. From my understanding the company who made these rigs is out of business so I'm wondering who would be the best person to do this modification. The rig / canopies have less than 50 jumps and I'm happy with everything else so I would like to try to make it work. Otherwise I'll probably just sell everything and try again. Thanks for any help / tips, Ralph Quote Share this post Link to post Share on other sites
skybytch 273 #2 February 22, 2010 Contact Ray at Action Air (ray at actionair dot com). They hold the TSO for Reflex, and there's a master rigger there who can do whatever harness work you need. Quote Share this post Link to post Share on other sites
masterrigger1 2 #3 February 22, 2010 Ralph, We would be happy to do it for you if you like. It is a pretty simple operation. Contact Ray also, I am just giving you a second option in case you do not want to deal with the "across the nation" shipping. Cheers, MELSkyworks Parachute Service, LLC www.Skyworksparachuteservice.com Quote Share this post Link to post Share on other sites
