JanuszPS 0 #1 April 20, 2009 Hi, I can buy a nice Vector 348 with PDR160 as my back up rig. I would like to put into it my current canopy - Cobalt 135. As per info which I found on the internet Impulse 135 vol is about 330cuin. So my question is if the main will not be too small for that container in this configuration. I've seen the most recent UPT sizing chart where the min canopy was 140 (mamba, vision). thanks in advance. JanuszBack to Poland... back home. Quote Share this post Link to post Share on other sites
JohnDeere 0 #2 April 20, 2009 I have a V348 and currently have a Sab 2 150 in it. It fits snug (only cause i have a logo on the bottom skin, so double layer bottom skin on like 4-5 cells) I know it will be perfect with a Sab 2 135 w/ logo.I think it would safely hold a 135 w/o logo also. I dont know the volume of eight thought so you will have to figure that out. When i ordered this container i got it to hold a Sab 170 down to a 135.Nothing opens like a Deere! You ignorant fool! Checks are for workers! Quote Share this post Link to post Share on other sites
erdnarob 1 #3 April 21, 2009 Have a look (maybe you did already) at the UPT Vector site. They now have 3 type of fittings for their container: loose, standard and tight. They have also some container size number for a particular main but with a bigger reserve.Learn from others mistakes, you will never live long enough to make them all. Quote Share this post Link to post Share on other sites