skydivingbreed 0 #1 February 3, 2008 About to demo a friend's canopy. He's on a vector, I've got a javelin. I want to know if can just use his vector risers on my javelin, or if I need to change his canopy to my risers. They both look like 21" mini risers, though the RSL ring is not on the same side. thanks Quote Share this post Link to post Share on other sites
Blink 1 #2 February 4, 2008 As long as the rings are the same size, you'll be fine, you'll find many people jumping risers from different manufacturers than their containers. Quote Share this post Link to post Share on other sites
skydivingbreed 0 #3 February 4, 2008 thank ya much! Quote Share this post Link to post Share on other sites
skybytch 273 #4 February 4, 2008 QuoteThey both look like 21" mini risers, though the RSL ring is not on the same side. Do NOT hook the RSL up if the ring is on the wrong riser. That may seem like a no-brainer, but I've seen it done... Quote Share this post Link to post Share on other sites
skydivingbreed 0 #5 February 4, 2008 thanks, yeah, I decided against attaching that particular piece... thanks for the heads up just in case though - btw - I actually attached the clip to the cutaway cable housing on the side it normally attaches to the RSL ring to. I figure this 1) keeps it from flapping and beating me in the face 2) is a safe place to put it since the cable housing isn't going anywhere, and therefore the RSL is non functional and not a hazard there Quote Share this post Link to post Share on other sites
