RSG 0 #1 April 3, 2007 Dear all Are the Cypres 1 Cypres 2 cutters the same? I have to buy a Cypres 2 1 pin cutter and it dos not show the deference between the 1 and 2 ? _________________________________________ R S G = Ready Set Goooooooooo Quote Share this post Link to post Share on other sites
IanHarrop 42 #2 April 3, 2007 From their site http://www.cypres.cc/Sites/englisch/My_Cypres_Cutter.htm CYPRES 1 field replaceable cutters (no aluminum grip) can be used with CYPRES 2. They will function properly, however this combination is not water-resistant. CYPRES 2 cutters (identified by aluminum grip) can be used with any CYPRES 1 with the field replaceable cutter connector. They function properly - but this combination is not water-resistant."Where troubles melt like lemon drops, away above the chimney tops, that's where you'll find me" Dorothy Quote Share this post Link to post Share on other sites
RSG 0 #3 April 3, 2007 Thanks a million_________________________________________ R S G = Ready Set Goooooooooo Quote Share this post Link to post Share on other sites
