0
stayhigh

Closing loop length for Infinity???

Recommended Posts

Couple weeks ago people freaked out about my closing loop being too long.(due to the grommet not being stacked on top of each other). So I have shorten it and had trouble closing it ever since.
My hardest part in packing is closing the damn thing so I looked up in my infinity manual and it says not to stack the grommet on top of each other.
I can still close mine, but should I make the closing loop longer and follow the manual or listen to the other people in the dropzone?
By the way container is made for size 190 and I use 190.
Bernie Sanders for President 2016

Share this post


Link to post
Share on other sites
Guest 1010
[sounding like one of the old guys]

If you don't like the answer you get from the owner's manual, why in heavens name would you listen to people on the internet? Maybe they or you have something misunderstood, who knows?

Well, the rig manufacturer knows, and VSE is VERY good at customer sevice, just call them and ask them. Takes less time then posting here, and you'll probably learn something about your rig as well. :)
Infinity (VSE) contact info web page

Contact Us
For more information, please contact us by:
Phone: +1 (253) 445 - 8790
Fax: +1 (253) 445 - 8792
E-mail: vse@velocityrigs.com
Mail: 10305 139th St. Ct. E
Unit D-1
Puyallup, WA 98374

You can have it good, fast, or cheap: pick two.

Share this post


Link to post
Share on other sites
Follow the manual. What is right for one rig may not be the same for the other. Kelly posts on here a bit and hopefully he sees your post and responds himself. Till then my advice is follow the manual, and for what it's worth I have heard Kelly say more than once that the grommets are not suppose to line up on the main for an Infinity.

DJ Marvin
AFF I/E, Coach/E, USPA/UPT Tandem I/E
http://www.theratingscenter.com

Share this post


Link to post
Share on other sites
I talked with Kelly while we were both at the American Boogie and asked him the same question. I showed him my rig and he said it looked just right. They don't stack, the top grommet is offset, just like the manual shows.
50 donations so far. Give it a try.

You know you want to spank it
Jump an Infinity

Share this post


Link to post
Share on other sites
Hi Mike, you are correct with your closing loop length. When closed properly, the grommets for the bottom flap, center flap, and right side flapshould all be stacked on top of each other, with the edge of the left side flap just meeting up the edge of the right side flap. The Infinity is designed this way to allow the pin cover flap to lay a little bit flatter over the pin and to allow a little more freedom when downsizing canopies:)
VSE on Facebook

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

0