karenmeal 0 #1 April 20, 2007 Never mind! "Life is a temporary victory over the causes which induce death." - Sylvester Graham Quote Share this post Link to post Share on other sites
Slappie 9 #2 April 20, 2007 Ok I'm scared. Depends on the drill, if it's cordless put it in REV hold onto the chuck. No not Skymonkeyone... the chuck is the end. It should release the bit. Put the new size in and select FWD to tighten it. If it's an older one, there should be a "chuck key" that fits into the chuck and you use it to loosen and tighten the chuck around the bit. "Find out just what any people will quietly submit to and you have found out the exact measure of injustice and wrong which will be imposed upon them." Quote Share this post Link to post Share on other sites
Lindsey 0 #3 April 20, 2007 Quote How do I change drill bits? I know it has something to do with reversing the direction and holding onto the end... I can't seem to do it!! Help me. I'm trying to install my cam-eye. Take the helmet off before drilling. Don't poke your eye out.-- A conservative is just a liberal who's been mugged. A liberal is just a conservative who's been to jail Quote Share this post Link to post Share on other sites
karenmeal 0 #4 April 20, 2007 Quote Take the helmet off before drilling. Don't poke your eye out. Fucking a.... now you tell me!If I'm bleeding out of my eye socket, do I really need to go see a doctor? "Life is a temporary victory over the causes which induce death." - Sylvester Graham Quote Share this post Link to post Share on other sites
Lindsey 0 #5 April 20, 2007 Quote Quote Take the helmet off before drilling. Don't poke your eye out. Fucking a.... now you tell me!If I'm bleeding out of my eye socket, do I really need to go see a doctor? too late-- A conservative is just a liberal who's been mugged. A liberal is just a conservative who's been to jail Quote Share this post Link to post Share on other sites
yardhippie 0 #6 April 20, 2007 Quote Quote Take the helmet off before drilling. Don't poke your eye out. Fucking a.... now you tell me!If I'm bleeding out of my eye socket, do I really need to go see a doctor? With your eye out do you reall think you'll 'see' the doctor? Goddam dirty hippies piss me off! ~GFD "What do I get for closing your rig?" ~ me "Anything you want." ~ female skydiver Mohoso Rodriguez #865 Quote Share this post Link to post Share on other sites
karenmeal 0 #7 April 20, 2007 Hmm... you make a good point. "Life is a temporary victory over the causes which induce death." - Sylvester Graham Quote Share this post Link to post Share on other sites
Slappie 9 #8 April 20, 2007 QuoteNever mind! You mean I posted that reply and you didn't need it? "Find out just what any people will quietly submit to and you have found out the exact measure of injustice and wrong which will be imposed upon them." Quote Share this post Link to post Share on other sites
ACMESkydiver 0 #9 April 20, 2007 Quote Quote Never mind! You mean I posted that reply and you didn't need it? No; you posted that reply and solved her problem! Hallelujah, brother! ~Jaye Do not believe that possibly you can escape the reward of your action. Quote Share this post Link to post Share on other sites
Lindsey 0 #10 April 20, 2007 And I'm also thankful, because since I'm manless in my life again I have to remember to go out and buy my own damn tools. I need a drill.-- A conservative is just a liberal who's been mugged. A liberal is just a conservative who's been to jail Quote Share this post Link to post Share on other sites
karenmeal 0 #11 April 20, 2007 Errr... Now I'm having trouble drilling the 1/2' hole. The drill bit keeps getting stuck and I think the battery is dying on the drill. Grrr... I want my cam-eye up and running!! Edited to add: and with my eye-hole bleeding and all.. this is really a chore. I stuck a maxi-pad to my cheek though and that is helping. "Life is a temporary victory over the causes which induce death." - Sylvester Graham Quote Share this post Link to post Share on other sites
yardhippie 0 #12 April 20, 2007 Quote Hmm... you make a good point. Yea! I know. Goddam dirty hippies piss me off! ~GFD "What do I get for closing your rig?" ~ me "Anything you want." ~ female skydiver Mohoso Rodriguez #865 Quote Share this post Link to post Share on other sites
ACMESkydiver 0 #13 April 20, 2007 Quote Quote How do I change drill bits? I know it has something to do with reversing the direction and holding onto the end... I can't seem to do it!! Help me. I'm trying to install my cam-eye. Take the helmet off before drilling. Don't poke your eye out. -but remember to have it on somebody else's head. After all, you need to make sure it's all lined up and everything! Just give 'em a bit of belt to bite on. They be a'ight. ~Jaye Do not believe that possibly you can escape the reward of your action. Quote Share this post Link to post Share on other sites
turtlespeed 226 #14 April 20, 2007 Quote Ok I'm scared. Depends on the drill, if it's cordless put it in REV hold onto the chuck. No not Skymonkeyone... the chuck is the end. It should release the bit. Put the new size in and select FWD to tighten it. If it's an older one, there should be a "chuck key" that fits into the chuck and you use it to loosen and tighten the chuck around the bit. Chuck Keys.I'm not usually into the whole 3-way thing, but you got me a little excited with that. - Skymama BTR #1 / OTB^5 Official #2 / Hellfish #408 / VSCR #108/Tortuga/Orfun Quote Share this post Link to post Share on other sites
Slappie 9 #15 April 20, 2007 Quote Quote Ok I'm scared. Depends on the drill, if it's cordless put it in REV hold onto the chuck. No not Skymonkeyone... the chuck is the end. It should release the bit. Put the new size in and select FWD to tighten it. If it's an older one, there should be a "chuck key" that fits into the chuck and you use it to loosen and tighten the chuck around the bit. Chuck Keys. Ya those unlock chucks stomach and releases a spewing fountain of whatever he ate that evening. "Find out just what any people will quietly submit to and you have found out the exact measure of injustice and wrong which will be imposed upon them." Quote Share this post Link to post Share on other sites
karenmeal 0 #16 April 20, 2007 It's done and it's booooootiful. Now I don't have to turn my camera on when we're still two minutes out and make someone check my red light. "Life is a temporary victory over the causes which induce death." - Sylvester Graham Quote Share this post Link to post Share on other sites
turtlespeed 226 #17 April 20, 2007 Quote It's done and it's booooootiful. Now I don't have to turn my camera on when we're still two minutes out and make someone check my red light. But you DO have to turn the camera on to take pictures of what you just did and post them.I'm not usually into the whole 3-way thing, but you got me a little excited with that. - Skymama BTR #1 / OTB^5 Official #2 / Hellfish #408 / VSCR #108/Tortuga/Orfun Quote Share this post Link to post Share on other sites
MrBrant 0 #18 April 20, 2007 Quote Errr... Now I'm having trouble drilling the 1/2' hole. Holy crap that's a big hole!! What are you drilling that's half a foot????? Quote Share this post Link to post Share on other sites
karenmeal 0 #19 April 20, 2007 A hole for my poly-tail to fit through... duh.Here is the cam-eye.. nice and recessed. "Life is a temporary victory over the causes which induce death." - Sylvester Graham Quote Share this post Link to post Share on other sites
CSpenceFLY 1 #20 April 20, 2007 Quote Quote Quote Take the helmet off before drilling. Don't poke your eye out. Fucking a.... now you tell me!If I'm bleeding out of my eye socket, do I really need to go see a doctor? Or need the Cam-Eye. With your eye out do you reall think you'll 'see' the doctor? Quote Share this post Link to post Share on other sites
Bolas 5 #21 April 21, 2007 Quote Errr... Now I'm having trouble drilling the 1/2' hole. The drill bit keeps getting stuck and I think the battery is dying on the drill. Grrr... I want my cam-eye up and running!! Edited to add: and with my eye-hole bleeding and all.. this is really a chore. I stuck a maxi-pad to my cheek though and that is helping. Eye-hole? Hey, Turtle!!! OTB^6? Stupidity if left untreated is self-correcting If ya can't be good, look good, if that fails, make 'em laugh. Quote Share this post Link to post Share on other sites
Amazon 7 #22 April 21, 2007 Oh gee I thought you were just having trouble with the drill since your trigger finger must be underdeveloped Quote Share this post Link to post Share on other sites
jdthomas 0 #23 April 21, 2007 use caution when drilling on helmets as your camera can get the drill dust in it and short it out. i fried a camera because I did not get all the carbon fiber material cleaned up after a drilling of the helmet.. 850$ camera fried and gone to the trash! i called sony to get it fixed but it would cost more to fix then the price of a new camera. good job on the helmet, it looked like good work. joewww.greenboxphotography.com Quote Share this post Link to post Share on other sites
karenmeal 0 #24 April 21, 2007 I used a vacuum to suck the dust out.. hopefully that worked. But then I took it on three jumps.. that probably cleared the dust out pretty good. "Life is a temporary victory over the causes which induce death." - Sylvester Graham Quote Share this post Link to post Share on other sites
jdthomas 0 #25 April 22, 2007 Quote I used a vacuum to suck the dust out.. hopefully that worked. But then I took it on three jumps.. that probably cleared the dust out pretty good. I tried the air out method as well and thought everyting was good to go. I am not sure if i got the carbon fibre from the helmet or the work area even though I thought i did a very good clean up. Sounds like you did a good job if you have had no problems. I wish that I had done so.www.greenboxphotography.com Quote Share this post Link to post Share on other sites
