tight rig

[burnout 0]

I just bought a new micron and the rig fits so tight on my shoulders it leaves red marks after only a few minutes. Relative workshop wants to add 2'' to the laterals instead of extending the main webbing. I dont agree with this but Im not an expert. I could use a second opinion before I let them do this.

[packing_jarrett 0]

What Jump shack did with my rig was just move the laterals down wich shortens the legstraps so the put new leg pads on. Wouldn't extending the laterals just move the rig off the back. But I'm no expert either

Na' Cho' Cheese

[BIGUN 1,483]

Second Opinion: Let RWS do their thing.

Nobody has time to listen; because they're desperately chasing the need of being heard.

[johnny1488 1]

Double and triple check the original measurements. Find out why the rig does not fit. Have someone at a reputable gear store measure you.

I say this because I have seen manufacturers try to lengthen the laterals when the correct action was to lengthen the yoke (make a new rig).

Before anything is started find out what the rig should be first. If it should be a larger yoke size and the fault is with the manufacturer, demand a new rig. If the fault is with the person you ordered it from, then you haqe to work it out with them.

This is not directed at RWS.

Johnny
--"This ain't no book club, we're all gonna die!"
Mike Rome

[riggerrob 643]

I can only give you a second opinion if I see you wearing the ill-fitting rig.