Broke 0 #1 January 3, 2006 Ok so I did a search in the forums and while I did find some very good answers I didn't find answers to all my questions. I then followed up with a little research of my own. In my search I noticed a lot of people asking questions about skydiving rigs harness measurements and container sizing. Here is what I have come up with so far. Hopefully this will help some others I know it is definitally helping me. This info below is for the Javelin series of harness and container systems from sunpaths web site sunpath.com. http://www.sunpath.com/sizchart.htm Continer sizes http://www.sunpath.com/sizchart-harness.htm Harness sizing Here is some information from tridents web site for the reflex series of containers. They didn't have any information about harness sizing. They didn't have any information available for the Viper series. http://www.tridenthc.com/ReflexSizes.htm I am also waiting on a couple of emails from a couple of manufacturors. I'll add what I get at a later date.Divot your source for all things Hillbilly. Anvil Brother 84 SCR 14192 Quote Share this post Link to post Share on other sites
pilotdave 0 #2 January 3, 2006 Vector 3 container sizing: http://www.relativeworkshop.com/saldoc_sizing.html Dave Quote Share this post Link to post Share on other sites
Joellercoaster 6 #3 January 4, 2006 Aerodyne - Icon Sport container sizes. I don't think they do specific harness sizes, but they do supply measuring guidelines.-- "I'll tell you how all skydivers are judged, . They are judged by the laws of physics." - kkeenan "You jump out, pull the string and either live or die. What's there to be good at? Quote Share this post Link to post Share on other sites
woodpecker 0 #4 January 4, 2006 QuoteAerodyne - Icon Sport container sizes. I don't think they do specific harness sizes, but they do supply measuring guidelines. And their guidlines were spot on for me. I had my custom Icon delivered this past july and ordered it from the measuring guidlines listed on their site. Fits like a glove.SONIC WOODY #146 There is a fine line between cockiness and confidence -- which side of the line are you on? Quote Share this post Link to post Share on other sites
Broke 0 #5 January 4, 2006 I got an email back from the wings representitive. Basically I was told if you are looking to pick up a used wings harness/container system one should find out the serial number, and then the information as to the body that fits that rig can be obtained. I guess you would then use the measurement chard from thier order form to compair to see if it would fit. Also aparently they have 30 different container sizes... wow. Then again how many different canopies are there?Divot your source for all things Hillbilly. Anvil Brother 84 SCR 14192 Quote Share this post Link to post Share on other sites