outlawphx 1 #2 September 6, 2005 I had a Vector II with a 19.5" MLW, and it fit me well at 6'1" (200lbs at the time, usually wear a 33" or 34" inseam). I tried a Odyssey recently that was a C-20, at it was too big. I do only weigh 185 now, so that may affect it as well... Quote Share this post Link to post Share on other sites
bob.dino 1 #3 September 6, 2005 Haven't you got a custom rig on order? Why the ? Quote Share this post Link to post Share on other sites
grue 1 #4 September 6, 2005 QuoteHaven't you got a custom rig on order? Why the ? Yeah, I didn't realise how long my MLW is going to be until I asked Kelly, hehe. I'm just getting excited/nervous, I should have it in a couple of weeks cavete terrae. Quote Share this post Link to post Share on other sites
DeNReN 0 #5 September 7, 2005 yea man...sounds way to long....hope ya got time to have it sent back and shortened...but not too short..cause then you would have to send it back again to be lengthened...and then back to be shortened..then back again.......... Quote Share this post Link to post Share on other sites
grue 1 #6 September 7, 2005 Quoteyea man...sounds way to long....hope ya got time to have it sent back and shortened...but not too short..cause then you would have to send it back again to be lengthened...and then back to be shortened..then back again.......... That's not funny. Ok, yes it is cavete terrae. Quote Share this post Link to post Share on other sites
mjosparky 4 #7 September 7, 2005 Did you have a dealer or someone that understands the gear and the order form measure you, or did you fill in the blanks all by your self? If a dealer measured you and it doesn't fit its on the dealer. If you by-passed the dealer and measured yourself, OPPS! SparkyMy idea of a fair fight is clubbing baby seals Quote Share this post Link to post Share on other sites
grue 1 #8 September 7, 2005 QuoteDid you have a dealer or someone that understands the gear and the order form measure you, or did you fill in the blanks all by your self? If a dealer measured you and it doesn't fit its on the dealer. If you by-passed the dealer and measured yourself, OPPS! Sparky I had a tailor do it. I don't doubt it'll fit, I'm just asking if that's fairly long for an MLW measurement.cavete terrae. Quote Share this post Link to post Share on other sites
kingbunky 3 #9 September 7, 2005 i ordered a new infinity last winter. my wife (using the instructions) measured me, but we chose the wrong spot on the hip to measure to (the 'pivot point' of the hip rather than the top of the hip bone). after getting re-measured at a gear store i saw where i went wrong. as a result, my mlw was about 2.5" too long. i sent it back and the fixed it all up for me. more great service from vse! "Hang on a sec, the young'uns are throwin' beer cans at a golf cart." MB4252 TDS699 killing threads since 2001 Quote Share this post Link to post Share on other sites
mjosparky 4 #10 September 8, 2005 QuoteI had a tailor do it. I don't doubt it'll fit, I'm just asking if that's fairly long for an MLW measurement. And how many H/C systems has this tailor made? Yes, a 19 1/2" MLW is long. SparkyMy idea of a fair fight is clubbing baby seals Quote Share this post Link to post Share on other sites
grue 1 #11 September 8, 2005 Quote And how many H/C systems has this tailor made? Yes, a 19 1/2" MLW is long. How many H/C manufacturers do YOU know of in Northwest Iowa? Someone's gotta do the measurement. Better a tailor than someone that lives in my dorm.cavete terrae. Quote Share this post Link to post Share on other sites
mjosparky 4 #12 September 8, 2005 QuoteQuote And how many H/C systems has this tailor made? Yes, a 19 1/2" MLW is long. How many H/C manufacturers do YOU know of in Northwest Iowa? Someone's gotta do the measurement. Better a tailor than someone that lives in my dorm. Is that anywhere near the Spirit Lake/Arnolds Park area? SparkyMy idea of a fair fight is clubbing baby seals Quote Share this post Link to post Share on other sites
grue 1 #13 September 8, 2005 QuoteQuoteQuote And how many H/C systems has this tailor made? Yes, a 19 1/2" MLW is long. How many H/C manufacturers do YOU know of in Northwest Iowa? Someone's gotta do the measurement. Better a tailor than someone that lives in my dorm. Is that anywhere near the Spirit Lake/Arnolds Park area? Sparky According to maps.google.com, it's 110 miles to Spirit Lake, but all lameass county roads, so it's apparently a 3 hour drive.cavete terrae. Quote Share this post Link to post Share on other sites
mjosparky 4 #14 September 8, 2005 I was a kid on those "lameass county roads". Good luck with your rig. SparkyMy idea of a fair fight is clubbing baby seals Quote Share this post Link to post Share on other sites
