0
Newbie

why do you NOT jump a pullout?

Recommended Posts

I'm thinking about changing to one - so far i can't work out really what the major disadvantage of using one is, other than a slightly different packing procedure, which isn't actually much of an issue.

I'm thinking i would like to change just to not have the possibility of a PC in tow to potentially deal with at some point.

Thanks for your help.

"Skydiving is a door"
Happythoughts

Share this post


Link to post
Share on other sites
I used one for over 1000 dives.

Back in the old days (late 80's) many people died as a result of twisted leg straps and twisted belly bands with throw-out rigs. Pull-outs avoided this. As air speeds picked up, and freestyle and freeflying came along, the exposed velcro further increased the risk associated with jumping a throwout.

Since the advent of the BOC, however, many of the disadvantages of the throwout were negated.

Pullout's, however, still have issue with floating puffs, and some questionable designs result in impossible pull senarios as a result of small packing errors.

PC in tow malfunctions....

Really, all your effort should go into avoiding one, not equiping yourself to deal with one. Besides. You'll need that throw-out when you start to fly a wingsuit - that most critical of all disipline when it comes to PC's in tow...

t
It's the year of the Pig.

Share this post


Link to post
Share on other sites
Can't think of why *I* wouldn't jump one.;)

However:
Quote

I'm thinking i would like to change just to not have the possibility of a PC in tow to potentially deal with at some point.



This malfunction is not totaly imposible. If the bridle is stowed poorly it could entangle with the P/C thus choking it closed leaving little drag to complete the deployment. Very rare scenario, and if altitude permits a deployment of the main may still be possible .

Also, most if not all of the manufacturers of wingsuits do not recommend pullouts. I don't find a basis for this recomendation, but it is there.
----------------------------------------------
You're not as good as you think you are. Seriously.

Share this post


Link to post
Share on other sites
as JP said - wingsuits. I did a lot of asking around experienced people at my DZ both who jump pull-out and those who jump BOC. I reached a similar conclusion to yours, but wanted to try a wingsuit when I got 500 jumps so went for the BOC. I would say it was only trying wingsuits that made me decide that way.

tash
Don't ever save anything for a special occasion. Being alive is a special occasion. Avril Sloe

Share this post


Link to post
Share on other sites
Back in the "olden" days our DZO wouldn't allow ANY hand deploy PC's on his private airport. Only Ripcords. He wanted one safety advantage over ripcords (not convenience or looks) I pointed out that the PC as a pull force of over 100lbs. (Pick you number and don't argue.:P) And that I couldn't pull a 100 lbs off the floor just using my arms like pulling a ripcord. He said "yep" and allowed them. That and the curved pin had just been put in use avoiding many of the tow situations. ;)

I still can't pull a 100lbs off the floor. So the PC has a better chance of pulling the pin than I do.

One disadvantage is that you MAY have to have more strength to pull the pin than deploy the throwout. Not say there aren't no pulls on throwouts but these are packing issues not design. I have one customer who can't move to a BOC because his shoulder doesn't work well that way.

Note, the arguments are more complicated than that. Both need attention and maintenance. But pull out designs STILL don't seem to be perfected. Note the variation in handle stowing designs. Throwouts seem to be better perfected. Pull outs have gotten better. But in the 80's and early 90's a majority of the reserve rides on our small DZ were due to floating pullout handles.

I've had a throw out in tow. I almost died. It could have been prevented. Maintenance issue, not design. I still jump throwouts.
I'm old for my age.
Terry Urban
D-8631
FAA DPRE

Share this post


Link to post
Share on other sites
Quote

Ok i completely forgot about the wingsuit issue. That's still some ways off for me, but it's where i want to go, so i guess that was quite an easy decision to make..



Jumping a wingsuit is only 50 jumps away for you if you want to start. Sounds like you've already made the throwout pc decision. So throw $20 in the cookie jar for each of the next 50 jumps and you'll have the bucks for the suit. Presto! Broke but happy!
Sometimes you eat the bear..............

Share this post


Link to post
Share on other sites
At present day's, mostly kill line PC system is used in order to eleminate the parasitic drag from PC and flight performances degradation. With pullout PC you will have it following you like small brake parachute:) if only you'll don't have it over your canopy before your nose - one more fun things that could happing with pullout PC :) (I had that once :) looks really funny:))...
Why drink and drive, if you can smoke and fly?

Share this post


Link to post
Share on other sites
Quote

At present day's, mostly kill line PC system is used in order to eliminate the parasitic drag from PC and flight performances degradation. With pullout PC you will have it following you like small brake parachute:) if only you'll don't have it over your canopy before your nose - one more fun things that could happen with pullout PC :) (I had that once :) looks really funny:))...



>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

Say what?

Just yesterday, I installed a (Jump Shack) factory-stock pull-out pilot chute in a Racer, and it had a kill-line.
Last week I installed a (Flying High) factory-stock, pull-out, kill-line pilot chute in a Sidewinder.
This morning I have to repack a Voodoo with a (Rigging Innovations) factory-stock pull-out, kill-line pilot chute.

Perhaps you were referring to spring-loaded pilotchutes?
... because no one has figured out how to install a kill-line strong enough to compress the pilot chute?

Share this post


Link to post
Share on other sites
... because I have survived 4500 jumps with throw-outs.

... because I am too old and too grumpy to learn how to use a new handle.

... because I have repacked a lot of reserves for guys who could not find their floating pull-out handles.

... because pull-outs are not wingsuit-compatible.

Share this post


Link to post
Share on other sites
I jumped one for over 1000 jumps. I do not jump one now, because every once in a while the PC would catch air before I fully let go. It would tweak my arm just a little. I didn't really feel it, but over time I developed a fluid sack on my shoulder from the friction. Not painfull. Just funny looking.

Now that the throw out rigs are so clean and the bridle is very well protected, I went back to a throw out.

Just personal choice. I think pull outs rock.

~~~~~~~~~~~~~~~~~
Peace and Blue Skies!
Bonnie ==>Gravity Gear!

Share this post


Link to post
Share on other sites
Quote

as JP said - wingsuits.



To state again, I can't find a reason for that. They work fine and seem to have a much reduced tow possibility.

That said, you can do what I did for the first 30 or so wingsuits. I made a small mod to my rig and bridle that allowed me to go back and forth between throw out and pull out. You'd have to add a BOC on the rig, or use the one on the suit if it had one, and either switch bag and pilotcute, or easier yet is have the bridle modified like a Mirage pullout so that the pullout handle, pun, gromet, and lanyard are larks headed onto the biridle at the P/C. You'll also need to install a freefly style handle on the apex of the P/C.
----------------------------------------------
You're not as good as you think you are. Seriously.

Share this post


Link to post
Share on other sites
Quote

because I have repacked a lot of reserves for guys who could not find their floating pull-out handles.



As many as you've repacked for the P/C in tow situation?

Quote

because pull-outs are not wingsuit-compatible.



Untrue.

Quote

because I am too old and too grumpy to learn how to use a new handle.



Old? Probably. Grumpy? You're a ray of sunshine.:D
----------------------------------------------
You're not as good as you think you are. Seriously.

Share this post


Link to post
Share on other sites
As I've said several times before on this forum, the market decided this issue many years ago. Now, 98% of all the rigs we make are BOC throw-out. From what I know, you are about 5 times more likely to have a main total if you jump a pull-out. This means you are 5 times more likely to have a terminal reserve opening if you use a pull-out. And because pull-outs are harder to deploy completely outside the burble, you are going to have a lot of pilot chute hesitations until you get used to the system. These are just some of the reasons I recommend against pull-outs. While some people have used them successfully for years, in the big picture they are a much more dangerous system than a throw-out.

Share this post


Link to post
Share on other sites
I haven't been in this sport for very long, only abot 5 years.

In those 5 years, strangely - I haven't seen many malfunctions.

Of the handfull that I've witnessed, or saw the gear afterwards, NONE of them were pilot-chute-in tow malfunctions.

While the pilot-chute-in tow is certainly a concern of mine, the anecdotal evidence I've seen clearly indicates it's not a common malfunction.

On the other hand, I've seen 3 people chop from floating puds. To me, that's amazing because there simply are not that many pull-outs out there.

To me, the risk analysis clearly indicates throw-out to be the superior deployment technique. I simply can't comprehend how someone would come to the alternate conclusion.

_Am
__

You put the fun in "funnel" - craichead.

Share this post


Link to post
Share on other sites
Quote

or use the one on the suit if it had one,



For his first 30 or so jumps?

I dont think so, since this BASE option is on the higher performance suits and NOT recommended for the first suit a beginner is going to fly. :|

Keepin' it safe!
Ed
www.WestCoastWingsuits.com
www.PrecisionSkydiving.com

Share this post


Link to post
Share on other sites
Quote

and some questionable designs result in impossible pull senarios as a result of small packing errors.



Which designs do you conceive as questionable, and which manufacturers have superior pullout designs?

It's just that I did order my Racer 2k3 with a pullout for reasons I'll post when it arrives...

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

0