lowpullin1 0 #1 October 26, 2004 where can i find a colored cutaway handle?? "It's hard to fly with the eagles when you are surrounded by turkeys." My Website Quote Share this post Link to post Share on other sites
jrcrackers 0 #2 October 26, 2004 for what kinda rig? Quote Share this post Link to post Share on other sites
mx757 4 #3 October 26, 2004 you can make your own. I'm assuming you have the silver handle cutaway handle like reserve handle and not soft pillow type velcro handle. they sell can's in hardware stores for coating tools like pliers handles , screwdrivers used in electrical work etc you can get them in many colors, dip the handle in and hand it up to dry makes nice rubberized coating on handle in color of your choice. pick color that easy to see and not the same color of your jump suit Quote Share this post Link to post Share on other sites
mjosparky 4 #4 October 27, 2004 That is probably not a real good idea. Contact the manufacture of your rig, Wings , they should be able to set you up. SparkyMy idea of a fair fight is clubbing baby seals Quote Share this post Link to post Share on other sites
mx757 4 #5 October 27, 2004 QuoteThat is probably not a real good idea. I don't see how it would hurt it or anything.. just dip the 2/3 handle that is exposed not the half that hold the handle in pocket.. you can maske it off with tape. it'll put tough rubbized coating on metal like pliers etc have on them Quote Share this post Link to post Share on other sites
mjosparky 4 #6 October 27, 2004 Very few people have a metal cutaway handle, most are cordura at least on the outside. It is very easy to order one in the color you want. It would be better if the handle color is in contrast to the jumpsuit, easier to see when the shit hits the fan. I don't think it is a good idea because it is not a pair of pliers. Dipping parts, wrapping parts or hanging things on a rig always makes me nervous SparkyMy idea of a fair fight is clubbing baby seals Quote Share this post Link to post Share on other sites
wingnut 0 #7 October 28, 2004 QuoteI don't think it is a good idea because it is not a pair of pliers. Dipping parts, wrapping parts or hanging things on a rig always makes me nervous my low profile metal cutaway handle thati got from jupshack withmy new racer has a rubber coating onit.... seems to be fine to me.... it's nice, rubbery and red....and metal.... ______________________________________ "i have no reader's digest version" Quote Share this post Link to post Share on other sites
mjosparky 4 #8 October 28, 2004 Quotemy low profile metal cutaway handle thati got from jupshack withmy new racer has a rubber coating onit I think this is the key phrase. It was made that way by the same people that make the rig. SparkyMy idea of a fair fight is clubbing baby seals Quote Share this post Link to post Share on other sites