0
Cappio

Skytronic Pro "LLLL" Display

Recommended Posts

I have a Skytronic Pro and the display reads "LLLL" when I turn it on. Anyone know what this means? The batteries are fresh. Instruction manual does not mention it. The Parasport Italia website has no information on this for Skytronic Pros. It does mention that this display on an FX means that the audible needs to rezero itself to ground level and gives instructions. But this is only for the FX. Does this mean the same thing on a Pro? If so then what? Cycling on and off does not help either.

Thaks for your help.

Share this post


Link to post
Share on other sites
Quote

I have a Skytronic Pro and the display reads "LLLL" when I turn it on. Anyone know what this means?


From: http://jumpvideo.com/pa_skytron_faq.html
LLLL INDICATION
You might get this indication when you go on an extended commercial flight or travel to another location with a different altitude. The unit needs to be manually calibrated: go to programming mode (press and hold MODE and SET) with both buttons depressed, the screen will begin blinking; press the MODE and SET buttons again and you should hear a beep -- you are now re-calibrated.

This applies to the FX but I would imagine that the advice is also good for the PRO.
Quote

Maybe you are holding it upside down and it says "7777"? (That's really just a joke. I have nothing useful to suggest)


Like the guy who went to the autoparts store and asked for a 710 cap for his car engine.;)

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

0