Javelin HArness re-size

[Squeak 17]

OK I placed a message on Sunpath site, but have had no reply.
So All you Riggers out there.
Can a Javelin harness be resized to be a little longer in the MLW, by either placing Hip Rings on it or by Lengthening the MLW itself?
I have a great J1 but the harness is just a little too short in the body for me. It fits great in all other areas.
So can it be done, how much to do and how long??
Could it be done whilst I'm in Florida in January???Any Help appreciated

You are not now, nor will you ever be, good enough to not die in this sport (Sparky)
My Life ROCKS!
How's yours doing?

[nbblood 0]

I am not a rigger but I did have a Javelin resized by SunPath.

They will not put hip rings on it if it doesn't have them already. However, I had the laterals resized and new leg straps put on (went from B12 snaps to thread thru). I also had them install a bridle cover and replace the BOC pouch while they had it. I think it cost around $200 for all that.

It sounds like you have the exact same problem I did, mine was a little long on me. When I got mine back it was perfect. I was very pleased with the results.

Blues,
Nathan

Blues,
Nathan

If you wait 'til the last minute, it'll only take a minute.

[KevinMcGuire 0]

Does the rig have chest rings as well? If so then it's a simple matter. If not then it gets a bit more complex, but it's still possible and not all that expensive
If your looking to get it done quick, Please PM.

[Squeak 17]

No rings at all(other than 3 ring)
It's a 1993 J1
I won't be in the states until January thats when I was hoping to get it done

You are not now, nor will you ever be, good enough to not die in this sport (Sparky)
My Life ROCKS!
How's yours doing?

[KevinMcGuire 0]

No problem. With no rings at all except for the D-rings, it is a very easy and quick job to do.